Clean-upĬlean valve immediately after use by turning can upside down and depressing the actuator for 3 to 5 seconds (some paint will be sprayed out, so be careful not to inadvertently spray yourself or other objects in the process) Clogging Note: Inexperienced operators should practice on scrap surfaces to first get the “feel” for spray paint application. Apply two or more light coats a few minutes apart to avoid drips and runes. Hold can upright 20 to 30cm from substrate and spray in steady back and forth motion, slightly overlapping each stroke. If mixing ball fails to rattle DO NOT USE CAN. Shake can vigorously for 1 minute after mixing ball begins to rattle. For best results a Spraymate white primer 2535 should be used as a base coat. Be sure the substrate is completely dry, remove loose paint and rust with a wire brush or sandpaper. Soaps and detergents can also be used but a final clean with a suitable solvent is recommended. Remove all dirt, grease, oil, salt and chemical contaminants with “A” grade lacquer thinners or methylated spirits. Drying time Surface dry 15- 30 minutes (Dry times will be extended during cold, wet or humid conditions).Application conditions Surface temperature between 10-32☌.Cover surrounding area to protect from spray mist. Avoid spraying in windy and dusty conditions. Use when temperature is between 10-32☌ and humidity is below 65% to ensure proper drying. Use outdoors or in a well ventilated area. Apply over a white base coat for best results. Spraymate Fluorescent Signal Green Spray Paint – 250ml is a lacquer based coating that provides a smooth, bright matt, day glow, finish on wood, metal and more. Please check the box to acknowledge our return’s policy, by doing so you agree to our Return’s Policy of AMT Composites stated above. In the event that you are returning faulty or defective goods which were ordered as part of a larger order then the outbound delivery charge refund will be calculated based on the total postage cost of the original order (using standard service) minus the cost to send the items you are keeping (using standard service). If you are returning faulty or defective goods, then your outbound and return delivery costs will be refunded in full (for orders from within South Africa’s Local Area’s.) Refund of Delivery Charges (Faulty/Defective Goods) Due to the way that shipping costs are incremented, this will often result in no delivery charge refund being due.Īny goods found to be faulty or defective and notified to us within 7 days of delivery can be returned to us for a full refund. If you return only part of an order, then the outbound delivery charge refund will be calculated based on the total postage cost of the original order (using standard service) minus the cost to send the items you are keeping (using standard service). If you return an order in its entirety, then your outbound delivery charges will also be refunded (for orders within the South Africa’s Local Area’s. Refund of Delivery Charges (Cancelled Orders) Any product that you have subsequently cut, shaped, broken or modified, unless found to be faulty or defective.Unrolled and improperly re-rolled fabrics, unless found to be faulty or defective.Opened containers of resin, hardener, silicone or chemical release agent, unless found to be faulty or defective.This does mean that, unless found faulty, we are unable to accept returns for: because you changed your mind) they must be unused and, in the condition, they were delivered to you in. To return goods that are not faulty (i.e. NO GOODS manufactured or sold by Advanced Materials Technology Pty Ltd will be accepted for a credit if returned after one (1) calendar month of original invoice date. Goods returned after 7 days will incur a 15% restocking fee of the items being returned. If you change your mind for any reason, goods can be returned to us for a full refund if notified to us within 7 days of delivery you have a further 7 days to dispatch the goods for their return to us. At AMT Composites we want you to be 100% happy with any purchase you make from us.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |